Control Panel and Display Interface Introduction
- At the end of the handle is the power button.
- In the middle of the back of the handle is a recessed LED indicator.
- Built-in microUSB charging port at the front end of the handle.
Operating Guide
1.Press the power button to power on, press again to power off.
2.Upon powering on, the default temperature is 150℃. The indicator light cycles in a gradual change from dim to bright blue (takes about 1.5 seconds to go from dim to bright, then another 1.5 seconds to go from bright to off, repeating in a loop).
3.When the battery is below 5%, the blue battery indicator on the LED display flashes rapidly (3 times per second) for about 30 seconds, after which the hair straightener will automatically shut down.
4.Charging can only be done when the device is powered off. Use a DC 5V\2A charger or mobile power bank for charging. If charging is initiated while the device is powered on, it will automatically shut down and enter charging mode. The device cannot be powered on while charging; it must be disconnected from the charger to power on.
5.During charging, the blue LED indicator flashes slowly (2 times per second). Once fully charged, the blue indicator light remains steady on.
