I. Power Button:
1. Long Press (1.5 seconds): Power on/off
2. If the device uses an LED head:
1. oSingle Press: Switch to green LED + infrared LED
2. oPress again: Switch to blue LED + infrared LED
3. oPress again: Switch to red LED + infrared LED mode (default mode)
4. oContinues to cycle through these modes with each press.
3. If the device uses a microcurrent head:
oSingle Press: Switch modes.
II. Power Knob:
1. If the device uses an LED head or microcurrent head:
The power knob function is disabled.
2. If the device uses a sponge wheel head or ice wheel head:
The power knob adjusts the motor speed.
Speed output range: 15%-100% (minimum speed 60 RPM, maximum 380 RPM).
III. LED Indicator Ring:
1. If the device uses an LED head or microcurrent head:
All LEDs will maintain a maximum brightness of 30% when powered on.
If the device uses a sponge wheel head or ice wheel head:
LEDs 8 to 12 maintain a maximum brightness of 30%.
The remaining LEDs indicate the output speed value, lighting up as the power knob is turned.
Low Battery Warning:
When the battery level is detected to be below 20%, the entire ring will breathe at a maximum brightness of 30% until the device powers off.
